Contact Arrangement: SPST (1 Form A)
Nominal Switching Capacity (resistive load): 8 A 250 VAC, 5 A 30V DC
Maximum Switching Power: 2 kVA AC, 150 W DC
Maximum Switching Voltage: 250 VAC, 125 VDC
Maximum Run Current: AC 5 A continuous (convective), >5 A to ≤6 continuous (forced air), >6 A to ≤8 A 50% duty cycle (forced air), DC 5 A continuous (convective), simultaneous operation of all relays
Contact Resistance: Max 30 mΩ
Contact Material: Au-flashed AgSnO2
Breakdown Voltage (initial) Between Open Contacts: 1000 Vrms for 1 min
Breakdown Voltage (initial) Between Contact and Coil: 3000 Vrms for 1 min
Surge Breakdown Voltage (initial) Between Contact and Coil: 5000 Vrms
Latch Set Time: 10 ms max
Latch Release Time: 5 ms max
Max Operating Speed: 3 cps
Mechanical Life: Min 5×107 (@180 times/min)
Electrical Life: Min 105 (resistive)
Fan Enable: Any relay set
Relay Contact State Indicators: Four bicolor (red = high, green = low) LEDs with adjustable pulse width modulation (PWM) illumination control
Control: I2C relay set & reset functions
Field Connector: Phoenix Contact 9-circuit
Power: +5 VDC @ 6 mA idle, 60 mA/relay typical during the latch & unlatch pulse event
Maximum Installed Modules: 10
